authentication enable

Description                                                    Configuration authentication of admin enable (Privileged mode) access.

Syntax                                                                  [no] authentication enable {local [tacplus] | tacplus [local]}

Parameter

Description

local

Uses the ACOS configuration for authentication of the enable password.

tacplus

Uses TACACS+ for authentication of the enable password.

Default                                                                local

Mode                                                                   Configuration mode

Usage                                                                  The authentication enable command operates differently depending on the authen­tication mode command setting:

     For authentication mode multiple, the ACOS device will attempt to authenti­cate the admin with the first specified method. If the first method fails, the next speci­fied method is used.

     For authentication mode single, the ACOS device will attempt to authenticate the admin with the first specified method. If the method fails, the ACOS device will return an error. By default, authentication mode single is selected.

See authentication mode.

Table of Contents

Index

Glossary

-Search-

Back