Description                                                    Specify the boot image location from which to load the system image the next time the ACOS device is rebooted.

Syntax                                                                  bootimage {cf pri | hd {pri | sec}}



cf | hd

Boot medium. The ACOS device always tries to boot using the hard disk (hd) first. The compact flash (cf) is used only if the hard disk is unavailable.

pri | sec

Boot image location, primary or secondary.

Default                                                                The default location is primary, for both the hard disk and the compact flash.

Mode                                                                   Configuration mode

Usage                                                                  If the ACOS device is a member of an aVCS virtual chassis, use the device-context com­mand to specify the device in the chassis to which to apply this command.

Example                                                            The following command configures the ACOS device to boot from the secondary image area on the hard disk the next time the device is rebooted:

ACOS(config)# bootimage hd sec

Secondary image will be used if system is booted from hard disk



Table of Contents