interface

Description                                                    Access the CLI configuration level for an interface.

Syntax                                                                  interface {
ethernet port-num |
lif logical-interface-id |
loopback num |
management |
trunk num |
tunnel num |
ve ve-num 
}

Default                                                                N/A

Mode                                                                   Configuration mode

Usage                                                                  If the ACOS device is a member of an aVCS virtual chassis, specify the interface number as follows: DeviceID/Portnum

For information about the commands available at the interface configuration level, see “Config Commands: Interface” in the Network Configuration Guide.

Example                                                            The following command changes the CLI to the configuration level for Ethernet interface 3:

ACOS(config)#interface ethernet 3

ACOS(config-if:ethernet:3)#

Table of Contents

Index

Glossary

-Search-

Back