lacp system-priority

Description                                                    Set the Link Aggregation Control Protocol (LACP) priority.

Syntax                                                                  [no] lacp system-priority num

Replace num with the LACP system priority, 1-65535. A low priority number indicates a high priority value. The highest priority is 1 and the lowest priority is 65535.

Default                                                                32768

Mode                                                                   Configuration mode

Usage                                                                  In cases where LACP settings on the local device (the ACOS device) and the remote device at the other end of the link differ, the settings on the device with the higher priority are used.

Table of Contents