lldp tx hold

Description                                                    Determines the value of the message transmission time to live (TTL) interval that is carried in LLDP frames. The hold-value can be from 1 to 100 seconds.

Syntax                                                                  [no] lldp tx hold hold-value

Default                                                                Default 4 seconds

Mode                                                                   Configuration mode

Usage                                                                  LLDP commands are only available in the shared partition.

Example                                                            The following command will set the transmission hold time to 255:

ACOS(config)# lldp tx hold 255

Table of Contents