logging email buffer

Description                                                    Configure log email settings.

Syntax                                                                  [no] logging email buffer [number num] [time minutes]




Specifies the maximum number of messages to buffer (16-256).

The default number is 50 messages.


Specifies how long to wait before sending all buffered messages, if the buffer contains fewer than the maximum allowed number of messages. You can specify 10-1440 minutes.

The default time is 10 minutes.

Default                                                                By default, emailing of log messages is disabled. When you enable the feature, the buffer options have the default values described in the table above.

Mode                                                                   Configuration mode

Usage                                                                  To configure the ACOS device to send log messages by email, you also must configure an email filter and specify the email address to which to email the log messages. See logging email filter and logging email-address.

Example                                                            The following command configures the ACOS device to buffer log messages to be emailed. Messages will be emailed only when the buffer reaches 32 messages, or 30 minutes passes since the previous log message email, whichever happens first.

ACOS(config)#logging email buffer number 32 time 30

Table of Contents