no

Description                                                    Remove a configuration command from the running configuration.

Syntax                                                                  no command-string

Default                                                                N/A

Mode                                                                   Config

Usage                                                                  Use the “no” form of a command to disable a setting or remove a configured item. Configu­ration commands at all Config levels of the CLI have a “no” form, unless otherwise noted.

The command is removed from the running-config. To permanently remove the command from the configuration, use the write memory command to save the configuration changes to the startup-config. (See write memory.)

Example                                                            The following command removes server “http99” from the running-config:

ACOS(config)#no slb server http99

Table of Contents

Index

Glossary

-Search-

Back