system all-vlan-limit

Description                                                    Set the global traffic limits for all VLANs.

The limit applies system-wide to all VLANs; collectively, all ACOS device VLANs cannot exceed the specified limit.

To configure the limit per individual VLAN, use system per-vlan-limit.

Syntax                                                                  [no] system all-vlan-limit
{bcast | ipmcast | mcast | unknown-ucast} num

Parameter

Description

all-vlan-limit

Limit applies system-wide to all VLANs. Collectively, all the ACOS device’s VLANs together cannot exceed the specified limit.

per-vlan-limit

Limit applies to each VLAN. No individual can exceed the speci­fied limit.

bast

Limit broadcast traffic.

ipmcast

Limit IP multicast traffic.

mcast

Limit all multicast packets except for IP multicast packets.

unknown-ucast

Limit all unknown unicast traffic.

num

Specifies the maximum number of packets per second that are allowed of the specified traffic type.

Default                                                                5000 packets per second.

Mode                                                                   Configuration mode

Example                                                            The following command limits each VLAN to 1000 multicast packets per second:

ACOS(config)#system per-vlan-limit mcast 1000

 

Related Commands                             system per-vlan-limit

Table of Contents

Index

Glossary

-Search-

Back