system glid

Description                                                    Apply a combined set of IP limiting rules to the whole system.

Syntax                                                                  [no] system glid num

Replace num with the global LID you want use.

Default                                                                None

Mode                                                                   Configuration mode

Usage                                                                  This command uses a single global LID. To configure the global LID, see glid.

Example                                                            The following commands configure a standalone IP limiting rule to be applied globally to all IP clients (the clients that match class list “global”):

ACOS(config)#glid 1

ACOS(config-glid:1)#conn-rate-limit 10000 per 1

ACOS(config-glid:1)#conn-limit 2000000

ACOS(config-glid:1)#over-limit forward logging


ACOS(config)#system glid 1

Table of Contents