system per-vlan-limit

Description                                                    Configure the packet flooding limit per VLAN.

The limit applies to each VLAN. No individual can exceed the specified limit.

To configure a global limit for all VLANs, use system all-vlan-limit.

Syntax                                                                  [no] system per-vlan-limit
{bcast | ipmcast | mcast | unknown-ucast} limit

Parameter

Description

bcast

Configure the limit for broadcast packets.

ipmcast

Configure the limit for IP multicast packets.

mcast

Configure the limit for multicast packets.

unknown-ucast

Configure the limit for unknown unicast packets.

limit

Configure the number of packets per second (1-65535).

Default                                                                1000 packets per second.

Mode                                                                   Configuration mode

Example                                                            The following example sets the packet limit to 5000 broadcast packets per second:

AOCS(config)#system per-vlan-limit bcast 5000

 

Related Commands                             system all-vlan-limit

 

Table of Contents

Index

Glossary

-Search-

Back