techreport

Description                                                    Configure automated collection of system information. If you need to contact Technical Sup­port, they may ask you to for the techreports to help diagnose system issues.

Syntax                                                                  [no] techreport
{interval minutes | disable | priority-partition name} 

Parameter

Description

interval minutes

Specifies how often to collect new information. You can specify 15-120 minutes.

The default interval is 15 minutes.

disable

Disable automated collection of system information.

Automated collection of system information is enabled by default.

priority-partition name

Configure the specified partition to automatically collect system information.

Default                                                                Automated collection of system information is enabled by default. The default interval is 15 minutes.

Mode                                                                   Configuration mode

Usage                                                                  The ACOS device saves all techreport information for a given day in a single file. Timestamps identify when each set of information is gathered. The ACOS device saves techreport files for the most recent 31 days. Each day’s reports are saved in a separate file.

The techreports are a light version of the output generated by the show techsupport command. To export the information, use the show techsupport command. (See show techsupport.)

If the ACOS device is a member of an aVCS virtual chassis, use the device-context command to specify the device in the chassis to which to apply this command.

Table of Contents

Index

Glossary

-Search-

Back