upgrade

Description                                                    Upgrade the system.

Syntax                                                                  upgrade {cf pri | hd {pri | sec}}
{
local image-name | [use-mgmt-port] url}
[
staggered-upgrade-mode Device device-id]
[
reboot-after-upgrade] 

Parameter

Description

cf

Write the upgrade image to the compact flash, replacing the image currently at that location.

hd

Write the upgrade image to the hard disk, replacing the image currently at that loca­tion.

pri

Replace the primary image on the specified location (compact flash or hard disk).

sec

Replace the secondary image on the hard disk.

local image-name

Use the specified upgrade image from the local VCS image repository.

Use show vcs images to view a list of available local images.

use-mgmt-port

Uses the management interface as the source interface for the connection to the remote device. The management route table is used to reach the device. By default, the ACOS device attempts to use the data route table to reach the remote device through a data interface.

url

File transfer protocol, username (if required), and directory path.

You can enter the entire URL on the command line or press Enter to display a prompt for each part of the URL. If you enter the entire URL and a password is required, you will still be prompted for the password. The password can be up to 255 characters long.

To enter the entire URL:

  tftp://host/file

  ftp://[user@]host[port:]/file

  scp://[user@]host/file

  http://[user@]host/file

  https://[user@]host/file

  sftp://[user@]host/file

staggered-upgrade-mode

Use VCS staggered upgrade mode.

reboot-after-upgrade

Reboot the system after the upgrade is complete.

Default                                                                N/A

Mode                                                                   Configuration mode

Usage                                                                  For complete upgrade instructions, see the release notes for the ACOS release to which you plan to upgrade.

Example                                                            Below is example output from a successful upgrade.

ACOS(config)# upgrade hd sec scp://admin@192.168.1.1/packages/ACOS_FTA_4_0_2_100.64.upg

Password []?

 

System configuration has been modified. Save? [yes/no]:yes

Building configuration...

Write configuration to primary default startup-config

[OK]

Running configuration is saved

 

Do you want to reboot the system after the upgrade?[yes/no]:yes

Getting upgrade package ...

.......................................................... Done (0 minutes 59 seconds)

Decrypt upgrade package ...

.................... Done (0 minutes 21 seconds)

Checking integrity of upgrade package ...

Upgrade file integrity checking passed (0 minutes 1 seconds)

Expand the upgrade package now ............ Done (0 minutes 10 seconds)

Upgrade ...................................................... Upgrade was successful (0 minutes 52 seconds)

Rebooting system ...

ACOS(config)#

 

Table of Contents

Index

Glossary

-Search-

Back