show access-list

Description                                                    Display the configured Access Control Lists (ACLs). The output lists the configuration com­mands for the ACLs in the running-config.

Syntax                                                                  show access-list [{ipv4 | ipv6} [acl-id]

Parameter

Description

ipv4 | ipv6

IP address type.

acl-id

ACL name or number.

Mode                                                                   All

Example                                                            The following command displays the configuration commands for ACL 1:

ACOS# show access-list ipv4 1

access-list 1 permit 198.162.11.0 0.0.0.255 Data plane hits: 3

access-list 1 deny 198.162.12.0 0.0.0.255 Data plane hits: 1

NOTE:                                                                   The ACL Hits counter is not applicable to ACLs applied to the management port.

Table of Contents

Index

Glossary

-Search-

Back