show axdebug status

Description                                                    Display per-CPU packet capture counts for AXdebug.

Syntax                                                                  show axdebug status [cpu-num [...]]

Mode                                                                   All

Example                                                            The following example shows the output for the show axdebug status command for all CPUs:

ACOS(config)#show axdebug status

axdebug is enabled

6660 seconds left

debug incoming interface 1

debug outgoing interface 2 3 5 8 9 10 11 12

maximum 111 packets

Captured packet length 1111

cpu#1 captured 4 packets.

cpu#2 captured 1 packets.

cpu#3 captured 8 packets.

cpu#4 captured 1 packets.

cpu#5 captured 0 packets.

cpu#6 captured 6 packets.

Table of Contents