show bootimage

Description                                                    Display the software images stored on the ACOS device.

Syntax                                                                  show bootimage

Mode                                                                   All

Example                                                            The following command shows the software images on an A10 Thunder Series 4430 device:

ACOS#show bootimage

(* = Default)



Hard Disk primary

Hard Disk secondary       2.7.2-P2-SP6.1 (*)

Compact Flash primary (*)

Compact Flash secondary


The asterisk ( * ) indicates the default image for each boot device (hard disk and compact flash). The default image is the one that the ACOS device will try to use first, if trying to boot from that boot device. (The order in which ACOS tries to use the image areas is controlled by the bootimage command. See bootimage.)

Table of Contents