show clns

Description                                                    Show Connectionless Network Service (CLNS) information.

Syntax                                                                  show clns [tag] [is-neighbors | neighbors]
[
 ethernet num |
 lif num |
 loopback num |
 management |
 trunk num |
 tunnel num |
 ve num
]
[detail]]

Parameter

Description

is-neighbors

Displays IS neighbor adjacencies.

neighbors

Displays CLNS neighbor adjacencies.

ethernet num

Display adjacency information for the specified ethernet interface.

lif num

Display adjacency information for the specified logical interface.

loopback num

Display adjacency information for the specified loopback interface.

management

Display adjacency information for the management interface.

trunk num

Display adjacency information for the specified trunk.

tunnel num

Display adjacency information for the specified tunnel.

ve num

Display adjacency information for the specified virtual interface.

detail

Displays detailed information.

Mode                                                                   All

Example                                                            The show clns neighbors command displays IS-IS helper information when ACOS is in helper mode for a particular IS-IS neighbor. Here is an example:

ACOS#show clns neighbors

Area ax1:

System Id      Interface   SNPA                State  Holdtime  Type Protocol

0000.0000.0004 ethernet 10 78fe.3d32.880a    * Up     99        L2   M-ISIS

The asterisk (*) character in the output indicates that IS-IS is in helper mode for the neighbor.

Table of Contents

Index

Glossary

-Search-

Back