show clock

Description                                                    Display the time, timezone, and date.

Syntax                                                                  show clock [detail]

Parameter

Description

detail

Shows the clock source, which can be one of the following:

  Time source is NTP

  Time source is hardware calendar

Mode                                                                   All

Example                                                            The following command shows clock information for an ACOS device:

ACOS#show clock detail

20:27:16 Europe/Dublin Sat Apr 28 2007

Time source is NTP

 

Example                                                            If a dot appears in front of the time, the ACOS device has been configured to use NTP but NTP is not synchronized. The clock was in sync, but has since lost contact with all configured NTP servers.

ACOS#show clock

.20:27:16 Europe/Dublin Sat Apr 28 2007

 

Example                                                            If an asterisk appears in front of the time, the clock is not in sync or has never been set.

ACOS#show clock

*20:27:16 Europe/Dublin Sat Apr 28 2007

Table of Contents

Index

Glossary

-Search-

Back