show ip-list

Description                                                    Display IP-list information.

Syntax                                                                  show ip-list [list-name]

Parameter

Description

list-name

Displays the configuration of the specified list. If you omit this option, the config­ured IP lists are listed instead.

Mode                                                                   All

Example                                                            The following example shows the IP lists configured on an ACOS device:

ACOS-Active(config)#show ip-list

Name                             Type     Entries

--------------------------------------------------

sample_ip_list_ng                IPv4     3

test-list                        IPv4     0

Total: 2

 

The following command shows the configuration of an individual IP list:

ACOS#show ip-list sample_ip_list_ng

ip-list sample_ip_list_ng

10.10.10.1

20.20.3.1

123.45.6.7

 

Table of Contents

Index

Glossary

-Search-

Back