show mirror

Description                                                    Display port mirroring information.

Syntax                                                                  show mirror

Mode                                                                   All

Example                                                            The following example shows the port mirroring configuration on an ACOS device:

ACOS#show mirror

Mirror Ports 1:         Input = 4       Output = 4

Ports monitored at ingress : 1

Mirror Ports 2:         Input = None    Output = 7

Mirror Ports 3:         Input = 9       Output = 9

Mirror Ports 4:         Input = 3       Output = None

The following table describes the fields in the command output.

Field

Description

Mirror Port

Mirror port index number.

Input

Indicates that inbound mirrored traffic from the monitor port can be sent out of the specified ethernet interface. If “None” appears instead of an ethernet interface number, it means that inbound mirrored traffic will not be sent out of this ethernet port.

Output

Indicates that outbound mirrored traffic from the monitor port can be sent out of the specified ethernet interface. If “None” appears instead of an ethernet interface number, it means that outbound mirrored traffic will not be sent out of this ethernet port.

Port monitored at ingress

Port(s) whose inbound traffic is copied to the monitor port.

Port monitored at egress

Port(s) whose outbound traffic is copied to the monitor port.

Table of Contents

Index

Glossary

-Search-

Back