show netflow

Description                                                    Display NetFlow information.

Syntax                                                                  show netflow {common | monitor [monitor-name]}

Parameter

Description

common

Displays the currently configured maximum queue time for NetFlow export packets.

monitor [monitor-name]

Displays information for NetFlow monitors.

Mode                                                                   All

Example                                                            The following example shows the configuration of a NetFlow monitor:

ACOS(config)#show netflow monitor

Netflow Monitor netflow-1

  Protocol                       Netflow v9

  Status:                        Enable

  Filter:                        Global

  Destination:                   Not Configured

  Source IP Use MGMT:            No

  Flow Timeout:                  10 Minutes

  Resend Template Per Records:   1000

  Resend Template Timeout:       1800 Seconds

  Sent:                          0 (Pkts) / 0 (Bytes)

  Records:                       Not Configured

The following table shows the descriptions of the command output:

Field

Description

Protocol

Specifies the NetFlow Protocol version (NetFlow v9 or NetFlow v10/IPFIX)

Status

Specifies whether or not the NetFlow monitor is enabled.

Filter

Identifies the specific type and subset of resources that are being monitored (global, specific ports, or a NAT pool).

Destination

Indicates the destination IP address and port, if configured.

Source IP Use MGMT

Specifies whether the IP address of the management port of the ACOS device is being used as the source IP of NetFlow packets.

Flow Timeout

Timeout value interval at which flow records are periodically exported for long-lived sessions. Flow records for short-lived sessions (if any) are sent upon termination of the session.

Resend Tem­plate Per Records

The number of records before the ACOS device resends the NetFlow template that describes the data to perform a refresh of the template on the NetFlow collector.

Resend Tem­plate Timeout

The amount of time before the ACOS device resends the template that describes the data to perform a refresh of the template on the NetFlow collector.

Sent

Total number of NetFlow packets and bytes sent.

Records

Specifies the NetFlow template types configured, which define the NetFlow records to export.

Table of Contents

Index

Glossary

-Search-

Back