show ntp

Description                                                    Show the Network Time Protocol (NTP) servers and status.

Syntax                                                                  show ntp {servers | status}

Parameter

Description

servers

Lists the configured NTP servers and their state (enabled/disabled).

status

Lists the configured NTP servers and the status of the connection between ACOS and the server.

Mode                                                                   Privileged EXEC level and configuration levels

Example                                                            The following commands show NTP information:

ACOS#show ntp servers

Ntp Server                               isPreferred Mode     Authentication

----------------------------------------------------------------------------

 10.255.254.50                   no          enabled  disabled

10.255.249.43                  no          enabled  disabled

 

ACOS#show ntp status

NTP Server                          Status

------------------------------------------

10.255.254.50                 synchronized

10.255.249.43                      polling

Table of Contents

Index

Glossary

-Search-

Back